TRADITIONAL FILTRATION
+
PURAFINER
=
TOTAL FILTRATION



RCA (USA)

RCA Brand

Centre Tank Services Ltd (ENGLAND)

CTS Brand

INSTALLATION

Purafiner Installation

Clean fuel is necessary for engine performance. Clean fuel enhances combustion, safety and reliability, while reducing maintenance and downtime. Clean fuel extends engine life. Three basic elements; water, dirt, and microbes may contaminate fuel. Traditional filtration must also address microbial contamination. This is where Purafiner comes to the rescue.

Purafiner Installation

Installation Instructions

The Purafiner unit is not a filter. Its function is to change the microbiological material causing blockages in fuel systems and damage to injector equipment.

To achieve this the Purafiner unit should be installed where convenient between the fuel supply tank and the filter units.

Puirafiner in diesel bus
There is no restriction to flow through the Purafiner unit. However heavy infestation can, as they sometimes do in pipes, cause blockages. The Purafiner is designed to prevent the build-up of foreign matter within the unit. In order to get the best results, the unit should be mounted vertically with the fuel connections at the lowest level.

The unique design of Purafiner means there is no dedicated inlet or outlet. Connections can be made at either side.

So the simple installations instructions are:

  • Install in the fuel line using suitable size tails or threaded unions.
  • Either horizontally or vertically.
  • Fuel inlet at either side.
  • Fuel connections at the lowest level as mounted.
  • Bleed air from the unit.
  • Finally, check the unit and joints for leaks

How to deal with blockages.

Blocking of the Purafiner is unlikely but may occur if the fuel tank is heavily contaminated prior to fitting the unit. The clearing of any blockage is dealt with exactly the same as for a blocked pipe. Disconnect from the fuel supply and the filter, pressurise the pipe from the filter end, blowing the blocking material into a suitable container.